Masonry Fireplaces (cont.)
Fuel grates [view picture]
  21" x 16" — Ea 64.30 — 64.30
  29" x 16" — Ea 82.30 — 82.30
  40" x 30" — Ea 127.00 — 127.00
Factory-built wood-burning fireplaces Including refractory-lined firebox, fireplace front, combustion air kit and damper with control. By hearth opening width. 21" depth overall.
  36" wide [view picture] B9@3.50 Ea 649.00 114.00 763.00
  42" wide B9@3.50 Ea 999.00 114.00 1,113.00
  50" wide B9@4.00 Ea 2,820.00 130.00 2,950.00
  36" wide, 1 open end B9@3.50 Ea 1,390.00 114.00 1,504.00
  36" wide, 3 open sides B9@4.00 Ea 2,090.00 130.00 2,220.00
  36" wide, see-through B9@4.00 Ea 2,040.00 130.00 2,170.00
  25" wide, EPA Phase II compliant B9@4.00 Ea 5,180.00 130.00 5,310.00
  Add for 8" Class A vent, per vertical foot B9@.250 LF 73.10 8.12 81.22
Gas-burning direct vent zero clearance fireplaces Vents directly through an exterior wall or the roof using sealed double chamber vent pipe. See vent pipe costs below. Waste gases exit through the vent inner chamber. Outside air enters the firebox through the vent outside chamber. Framing may be applied directly against the unit. Circulates heated air into the room. Includes brick firebox, fireplace front, bi-fold glass doors, temperature control, masonry logs and fuel grate. Electric ignition. Overall dimensions.
  36" high x 33" wide x 19" deep [view picture] B9@3.50 Ea 1,590.00 114.00 1,704.00
  43" high x 39" wide x 19" deep B9@3.50 Ea 1,640.00 114.00 1,754.00
  42" high x 36" wide x 23" deep B9@3.50 Ea 2,050.00 114.00 2,164.00
  41" high x 36" wide x 19" deep, 1 open end B9@3.50 Ea 2,720.00 114.00 2,834.00
  40" high x 36" wide x 19" deep, 2 open ends B9@4.00 Ea 2,820.00 130.00 2,950.00
  37" high x 44" wide x 24" deep, see-through B9@4.00 Ea 3,260.00 130.00 3,390.00
  Deduct for conventional B-vent units — Ea -140.00 — -140.00
Direct vent fireplace flue (chimney), double wall, typical cost for straight vertical installation [view picture]
  4" inside diameter 6-5/8" outside diameter B9@.167 LF 12.50 5.42 17.92
  5" inside diameter, 8" outside diameter B9@.167 LF 15.50 5.42 20.92
  Flue spacers, for passing through ceiling
    1" or 2" clearance B9@.167 Ea 13.60 5.42 19.02
  Typical flue offset B9@.250 Ea 85.70 8.12 93.82
  Flashing and storm collar, one required per roof penetration
    Flat to 6/12 pitch roofs B9@3.25 Ea 54.50 106.00 160.50
    6/12 to 12/12 pitch roofs B9@3.25 Ea 79.20 106.00 185.20
  Spark arrestor top B9@.500 Ea 111.00 16.20 127.20
Blower kit for heat-circulating fireplace, requires 110 volt electrical receptacle outlet (electrical wiring not included)
  Blower unit for connection to existing outlet B9@.500 Ea 110.00 16.20 126.20
  Add variable speed and thermostatic control B9@.100 Ea 80.00 3.25 83.25
Electric fireplaces, built-in Prefabricated, 120 volt, including grate, ember bed, interior face, thermostat, brightness control and logs.
  20" wide opening, 120 volt, 1,500 watts B9@2.50 Ea 449.00 81.20 530.20
  26" wide opening, 120 volt, 1,500 watts B9@2.50 Ea 534.00 81.20 615.20

The figures above are from a time and money saving construction cost manuals from Craftsman Book Company. Over 50 cost estimating databases are available and all come with the popular National Estimator program.

National Estimator helps you compile estimates and bids for any construction project

National Estimator lets you use these costs to create estimates for new construction, repair and remodeling, commercial and industrial projects. Copy and paste and anything you see here into your estimate. Then add overhead and profit and print the bid – or turn your bid into an invoice that goes out in a window envelope. It’s quick, easy and flexible.

Find out more about using these cost estimates with the National Estimator program:

Click here for more information on getting these cost estimates in book form and CD-ROM

Click here for more information on getting these costs as a download on the Web.

National Estimator Includes the following features:
Prints estimates and saves estimates to disk.
Add any percent for overhead, profit and sales tax. Plus, show or hide markup and unit costs.
Change, copy, revise or delete an estimate at any time.
Use your own labor rates and man-hour estimates.
Export to Excel, Word, QuickBooks Pro and others
Organize estimates by division with subtotals.
Turn estimates into invoices
No need to be connected to the Web when estimating.
Includes an extensive help system and free phone support.
CD-ROM includes the Watch Me video on disk.

www.contractors-license.org