Special Doors (cont.) These costs do not include electrical work. Equipment is a 4,000 lb. forklift.
Sliding metal fire doors. Motor operated, 3-hour rating, with fusible link. Add the cost of electrical hookup
  3' x 6'8" H5@16.0 Ea 3,970.00 857.00 111.00 4,938.00
  3'8" x 6'8" H5@16.0 Ea 4,230.00 857.00 111.00 5,198.00
  4' x 8' H5@16.0 Ea 4,380.00 857.00 111.00 5,348.00
  5' x 8' H5@16.0 Ea 4,540.00 857.00 111.00 5,508.00
  6' x 8' H5@16.0 Ea 5,430.00 857.00 111.00 6,398.00
Refrigerator doors, manually operated, 4", with hardware and standard frame
  Galvanized, cooler, 3' x 7', hinged F7@6.60 Ea 2,110.00 331.00 57.10 2,498.10
  Stainless, cooler, 3' x 7', hinged F7@6.60 Ea 2,410.00 331.00 57.10 2,798.10
  Stainless, freezer, 3' x 7', hinged F7@6.60 Ea 3,140.00 331.00 57.10 3,528.10
  Stainless, cooler, 4' x 7', hinged F7@6.60 Ea 2,720.00 331.00 57.10 3,108.10
  Galvanized, cooler, 5' x 7', sliding F7@7.93 Ea 3,060.00 398.00 57.10 3,515.10
  Galvanized, freezer, 5' x 7' sliding F7@7.93 Ea 3,580.00 398.00 57.10 4,035.10
Hangar doors, including hardware and motorized opener. Costs based on 150' wide doors, installed with a 25 ton hydraulic truck crane.
  To 20' high H5@.213 SF 27.20 11.40 11.80 50.40
  20' to 40' high H5@.142 SF 35.20 7.61 7.84 50.65
  40' to 60' high H5@.085 SF 41.40 4.55 4.70 50.65
  60' to 80' high H5@.061 SF 49.40 3.27 3.37 56.04
  More than 80' high H5@.047 SF 81.60 2.52 2.60 86.72
Revolving doors, 6'6" to 7' diameter, manual controls
  Aluminum F7@50.3 Ea 30,000.00 2,520.00 435.00 32,955.00
  Stainless steel F7@50.3 Ea 38,100.00 2,520.00 435.00 41,055.00
  Bronze F7@69.0 Ea 44,100.00 3,460.00 597.00 48,157.00
  Add for automatic door controls — % 40.0 — — —
Security grilles, aluminum, overhead roll-up type, horizontal 5/16" rods at 2" OC, chain hoist operated
      8' x 8', clear anodized aluminum F7@18.5 Ea 2,790.00 928.00 160.00 3,878.00
      8' x 8', medium bronze aluminum F7@18.5 Ea 3,930.00 928.00 160.00 5,018.00
  10' x 10', anodized aluminum F7@21.8 Ea 3,720.00 1,090.00 189.00 4,999.00
  16' x 15', anodized, motor operated F7@28.7 Ea 7,150.00 1,440.00 248.00 8,838.00
  18' x 8', anodized aluminum F7@26.3 Ea 5,710.00 1,320.00 228.00 7,258.00
  18' x 8', anodized, motor operated F7@28.7 Ea 6,660.00 1,440.00 248.00 8,348.00
Service doors, aluminum, overhead roll-up type
      4' x 4', manual counter shutter F7@13.6 Ea 1,140.00 682.00 118.00 1,940.00
      8' x 4', manual operation F7@12.7 Ea 1,640.00 637.00 110.00 2,387.00
  10' x 10', chain hoist operated F7@12.7 Ea 2,510.00 637.00 110.00 3,257.00
Insulated overhead aluminum doors, roll-up, 22 gauge interior, 20 gauge exterior, 115 v. operator, with side seals, electric safety edge and button station. With two dock bumpers and electrical hookup only.
      6' x 10', R-7 insulation F7@12.7 Ea 3,110.00 637.20 110.00 3,857.20
      8' x 10', R-8 insulation F7@13.6 Ea 4,440.00 682.30 118.00 5,240.30
  Add for powder coat finish — % 25.0 — — —
Service doors, steel, overhead roll-up, chain hoist operated
      8' x 8' F7@11.7 Ea 1,660.00 587.00 101.00 2,348.00
  10' x 10' F7@11.7 Ea 2,040.00 587.00 101.00 2,728.00
  12' x 12' F7@14.7 Ea 2,760.00 737.00 127.00 3,624.00
  14' x 14' F7@18.2 Ea 3,000.00 913.00 158.00 4,071.00
  18' x 18' F7@22.0 Ea 4,070.00 1,100.00 190.00 5,360.00
  18' x 14', 240 volt motor operated F7@25.0 Ea 5,290.00 1,250.00 216.00 6,756.00

The figures above are from a time and money saving construction cost manuals from Craftsman Book Company. Over 50 cost estimating databases are available and all come with the popular National Estimator program.

National Estimator helps you compile estimates and bids for any construction project

National Estimator lets you use these costs to create estimates for new construction, repair and remodeling, commercial and industrial projects. Copy and paste and anything you see here into your estimate. Then add overhead and profit and print the bid – or turn your bid into an invoice that goes out in a window envelope. It’s quick, easy and flexible.

Find out more about using these cost estimates with the National Estimator program:

Click here for more information on getting these cost estimates in book form and CD-ROM

Click here for more information on getting these costs as a download on the Web.

National Estimator Includes the following features:
Prints estimates and saves estimates to disk.
Add any percent for overhead, profit and sales tax. Plus, show or hide markup and unit costs.
Change, copy, revise or delete an estimate at any time.
Use your own labor rates and man-hour estimates.
Export to Excel, Word, QuickBooks Pro and others
Organize estimates by division with subtotals.
Turn estimates into invoices
No need to be connected to the Web when estimating.
Includes an extensive help system and free phone support.
CD-ROM includes the Watch Me video on disk.

www.contractors-license.org