Electric Motor Connection (cont.) Includes a NEMA-1 fusible heavy duty safety switch, connectors, fittings, ells, adapters, supports, anchors and conduit with wire appropriate for the load connected but no starter or motor.
Three phase wiring using 10' RSC, 20' PVC and 6' flex conduit, NEMA Class 1 (indoor) switch, 600 V
  For motor to 2 HP, 20 amps E4@7.18 Ea 266.00 358.00 624.00
  For 3 to 5 HP motor, 30 amps E4@7.90 Ea 268.00 394.00 662.00
  For 7 to 10 HP motor, 45 amps E4@8.30 Ea 334.00 414.00 748.00
  For 25 to 50 HP motor, 90 amps E4@9.30 Ea 631.00 463.00 1,094.00
  For 50 to 100 HP motor, 135 amps E4@14.1 Ea 1,040.00 703.00 1,743.00
  For 100 to 200 HP motor, 270 amps E4@21.9 Ea 2,660.00 1,090.00 3,750.00
Single phase, using 10' RSC, 20' PVC and 6' flex conduit, NEMA Class 3R (weatherproof) switch, 240 V
  For motor to 2 HP, 20 amps E4@6.63 Ea 133.00 330.00 463.00
  For 2 to 5 HP motor, 30 amps E4@6.97 Ea 135.00 347.00 482.00
  For 5 to 7.5 HP motor, 45 amps E4@6.94 Ea 205.00 346.00 551.00
Three phase using 10' RSC, 20' PVC and 6' flex conduit, NEMA Class 3R (weatherproof) switch, 600 V
  For motor to 5 HP motor, 20 amps E4@7.10 Ea 328.00 354.00 682.00
  For 1 to 10 HP motor, 30 amps E4@7.25 Ea 330.00 361.00 691.00
  For 10 to 25 HP motor, 45 amps E4@9.51 Ea 415.00 474.00 889.00
  For 25 to 50 HP motor, 90 amps E4@9.51 Ea 681.00 474.00 1,155.00
  For 60 to 100 HP motor, 135 amps E4@12.1 Ea 1,080.00 603.00 1,683.00
  For 125 to 200 HP motor, 270 amps E4@21.6 Ea 2,730.00 1,080.00 3,810.00
Electric Motor Connection Complete installation, including magnetic motor starter, overload relay, all wiring, a heavy duty fusible safety switch, junction box and cover, connectors, fittings, adapters, supports, anchors and conduit appropriate for the load connected. No motor included.
Single phase, using 10' RSC, 20' PVC and 6' flex conduit, NEMA Class 1 (indoor) starter, 230 V
  For motor to 2 HP, 20 amps E4@8.11 Ea 317.00 404.00 721.00
  For 2 to 3 HP motor, 30 amps E4@8.32 Ea 357.00 415.00 772.00
  For 3 to 8 HP motor, 45 amps E4@8.45 Ea 532.00 421.00 953.00
  For 8 to 15 HP motor, 90 amps E4@15.5 Ea 850.00 772.00 1,622.00
Three phase wiring using 10' RSC, 20' PVC and 6' flex conduit, NEMA Class 1 (indoor) starter, 480 V
  For motor to 2 HP, 20 amps E4@9.90 Ea 872.00 493.00 1,365.00
  For 2 to 5 HP motor, 30 amps E4@10.6 Ea 918.00 528.00 1,446.00
  For 7 to 25 HP motor, 45 amps E4@20.5 Ea 1,440.00 1,020.00 2,460.00
  For 25 to 50 HP motor, 90 amps E4@23.1 Ea 2,420.00 1,150.00 3,570.00
Single phase, using 10' RSC, 20' PVC and 6' flex conduit, NEMA Type 3R (weatherproof) starter, 230 V
  For motor to 2 HP, 20 amps E4@8.91 Ea 441.00 444.00 885.00
  For 2 to 5 HP motor, 30 amps E4@9.15 Ea 501.00 456.00 957.00
  For 5 to 7.5 HP motor, 45 amps E4@9.25 Ea 734.00 461.00 1,195.00
Three phase using 10' RSC, 20' PVC and 6' flex conduit, NEMA Type 3R (weatherproof) starter, 480 V
  For motor to 5 HP, 20 amps E4@10.9 Ea 1,260.00 543.00 1,803.00
  For 5 to 10 HP motor, 30 amps E4@11.7 Ea 1,320.00 583.00 1,903.00
  For 10 to 25 HP motor, 45 amps E4@22.5 Ea 2,090.00 1,120.00 3,210.00
  For 25 to 50 HP motor, 90 amps E4@25.4 Ea 3,480.00 1,270.00 4,750.00
Motor Starters Magnetic operated full voltage non-reversing motor controllers with thermal overload relays and enclosure.
Two pole, 1 phase contactors, NEMA Class 1 (indoor), electrically held with holding interlock, one reset
  Size 00, 1/3 HP, 9 amp E4@1.47 Ea 262.00 73.30 335.30
  Size 0, 1 HP, 18 amp E4@1.62 Ea 303.00 80.70 383.70
  Size 1, 2 HP, 27 amp E4@1.73 Ea 345.00 86.20 431.20
  Size 2, 3 HP, 45 amp E4@1.73 Ea 442.00 86.20 528.20
  Size 3, 7-1/2 HP, 90 amp E4@2.02 Ea 630.00 101.00 731.00

The figures above are from a time and money saving construction cost manuals from Craftsman Book Company. Over 50 cost estimating databases are available and all come with the popular National Estimator program.

National Estimator helps you compile estimates and bids for any construction project

National Estimator lets you use these costs to create estimates for new construction, repair and remodeling, commercial and industrial projects. Copy and paste and anything you see here into your estimate. Then add overhead and profit and print the bid or turn your bid into an invoice that goes out in a window envelope. Its quick, easy and flexible.

Find out more about using these cost estimates with the National Estimator program:

Click here for more information on getting these cost estimates in book form and CD-ROM

Click here for more information on getting these costs as a download on the Web.

National Estimator Includes the following features:
Prints estimates and saves estimates to disk.
Add any percent for overhead, profit and sales tax. Plus, show or hide markup and unit costs.
Change, copy, revise or delete an estimate at any time.
Use your own labor rates and man-hour estimates.
Export to Excel, Word, QuickBooks Pro and others
Organize estimates by division with subtotals.
Turn estimates into invoices
No need to be connected to the Web when estimating.
Includes an extensive help system and free phone support.
CD-ROM includes the Watch Me video on disk.

www.contractors-license.org